When it comes to DIY stuff, we love to think of possibilities. We started Backyard Flare because we had a dream that every backyard could be fabulous. Every backyard should have a statement piece that sets it off. Basically, we believe that all backyards deserve to have a wow factor. Your backyard is part of the “ALL”. A DIY outdoor fireplace may be the answer.
Conversation and drinks around the DIY outdoor fireplace.
And that backyard build doesn’t always have to be expensive. It doesn’t have to cost an arm and leg, or your next born, to build. We know this because we came up with budget but elegant build methods for DIY outdoor fireplaces and outdoor kitchens.
How about you?
Ever wonder if you had what it took to build a DIY outdoor fireplace? Let us answer that question for you. We know you do have what it takes because most of our customers have never built with cinderblock and mortar and they’ve built beautiful structures. Use one of our easy-to-follow DIY construction plans and start building today. There’s no better time than the present.
This is our Cholla design built by a DIY homeowner
Ready for your DIY Outdoor Fireplace project?
If you are thinking that you want a fun, rewarding, and budget minded DIY project, look no further than Backyard Flare. We can help you with mentorship opportunities while you build. We will be there for you along the way with help, tips, answers, etc… Yep, you’re not alone in your quest for a gorgeous DIY backyard space. Go to www.backyardflare.com today and start your journey or get ahold of us using the contact found on the website. We’d love to hear from you. Thanks for reading and as we always say, “happy building”.
Hello all you DIYers and enthusiasts of backyard fireplace and transformation. I wanted to write a bit about one of our latest ventures, a corner Arizona outdoor fireplace with storage voids that I built at my in-law’s house in Arizona. The backyard isn’t huge, only about 30 feet deep from the back of the house to the back wall, so we decided to offset the fireplace in the corner to not block the mountain view.
Doesn’t Have to be Expensive!
The best
part of this whole build is that we really designed and built on a budget, building
as inexpensive as possible without substituting quality. In total, we spent just over $1,600, and that
included the poured concrete slab, lighting, and all finish work. It really is amazing at what you can build
and how cheap the overall cost can be when you enter the DIY world. So, let’s break it down.
The Backyard Fireplace Building Begins
Getting the slab poured is lots of fun. Use wire mesh or rebar in your concrete pour to add strength to the slab.Concrete is a dirty job but lots of fun at the same time.
We knew the footprint of the backyard fireplace so we worked with disturbing only that area. We excavated the site and prepared the ground for the concrete slab, using steel in the pour. Once the concrete cured for a few days, we began laying the block as per the construction plan, which showed literally where every block went. So easy! We established the entry point at the back of the structure for the low voltage lighting wire to come in and routed that wire through the structure.
We filled wooden jigs with concrete to create the arched lintels.
The storage
voids and firebox were arched and that was completed by building wood jigs,
supporting them in place, and pouring concrete into them to create the
lintels. The arches really made the
three openings come to life, so we are happy we made that decision.
Finish Work Decisions
Just an amazing night with family and friends.
When the rough
build was completed, we lined the firebox with firebrick in a stacked pattern to
change it up and covered the whole structure in smooth coat stucco. The stucco was then painted to match the
color of the house, so it tied everything in.
Almost all horizontal surfaces were covered in a gorgeous honey brown
flagstone that we chisel cut for a rustic edge.
The LED lighting was added to the front of the structure and inside each
storage void, where it was connected to the low voltage wire. We are so happy we made the decision to add
lights because it makes the whole structure come to life even when not in use.
Finished DIY outdoor backyard fireplace with painted stucco and brick patio
The patio spanning the front of our backyard fireplace was completed in a random pattern with colored concrete pavers. It sure made the whole sitting area complete, giving it a finished look. We have enjoyed the fireplace even through the summer with ambiance fires, so we’re not letting the warm nights slow us down. Sitting at a distance is the way we do it when it’s warm outside. Just make sure you and your guests have your drink of choice while you sit and relax.
Want to Build a Backyard Fireplace Too?
We hope you love our backyard fireplace and all of what we built as much as we do and that you are inspired to step into this as well. Backyard Flare, LLC is the leader in DIY outdoor fireplace construction plans. Whether you are an accomplished mason or someone who has NEVER worked with block and mortar, you can build our designs. Open the construction plan and begin building your own backyard fireplace. We are confident that you too can build a masterpiece, so get going on your design ideas.
