masonry - Your DIY Outdoor Fireplace Headquarters

3 Great Ways to Finish Your Outdoor Fireplace

After building your outdoor fireplace, outdoor kitchen, or other outdoor structure, there are endless ways to finish the look. You will have to consider options for both your horizontal and vertical surfaces as well as extra bling such as lighting.

This article isn’t long enough to possibly explain or list the seemingly endless combinations of veneer and seating options so we’ll just briefly talk about a few of the more popular looks. There are a lot of manufacturers that make and deal in different types of products but they all effectively do the same thing. They add a beauty to the outside surface of your outdoor fireplace. Faux stone, tile, stacked real stone, and stucco are among the most popular looks.

Vertical Surfaces

The basic purpose of these vertical veneers is to cover the drab gray cinder block. Let’s go through them one by one. Faux stone looks very realistic and it can add a rustic look like the fireplace was built entirely out of rock. Lots of different looks are available. Tile veneers can expand into regular ceramics or even a natural travertine stone. These tile veneers will give you a more modern look most of the time.

Outdoor fireplace with stacked stone, flagstone and lighting — Stacked stone and lighting on a three sided outdoor fireplace

Stacked stone is a real stone that has been milled and shaped so the pieces fit together nicely. Some of the better products will look seamless. The small size of the stone allows for several different colors and stone variations to be used in conjunction with each other. Very elegant. The final veneer that offers a great look is stucco. Stucco can be textured or applied as a smoother surface. The beauty of stucco is that it weathers well and it can be painted to match other items in your backyard.

Horizontal Surfaces

When it comes to the horizontal surfaces of the outdoor fireplace, look to natural stone for a smorgasbord of different textures and colors. Most of this stone is very easy to work with. You will cut the sections of stone with the same diamond blade you used to build your cinder block structure.

Flagstone seating on an outdoor fireplace — Flagstone ready for trimming

If you decide on the color of the vertical veneer and the horizontal surface material at the same time, you can pick great matching elements. Certain colors and textures really complement each other but there is definitely no “one way” to complete the finish work of the structure. As far as veneer and horizontal surface material is concerned you have more options than you can imagine.

Lighting

Lighting is a great way to add that special flair to any outdoor fireplace. It brings a certain elegance to the fireplace and if used along the bottom of the hearth, it will frame it nicely. Low voltage lighting is the way to go for this look and the addition of this lighting is relatively inexpensive.

Comment on this article with your thoughts. Share your favorite final look and/or what you did to make your fireplace a one of a kind.

Visit us at www.backyardflare.com for great content and ideas for your outdoor fireplace.

Three Phases to Plan Your Backyard

Building Your Backyard

If you have ever wondered how to go about building your backyard to perfection, then keep reading. We hope this article will give you a bit of guidance.

For many, their backyard area is an eyesore. Others just need a bit of spicing up. If you are in either category, you can achieve the perfect backyard if you adhere to the right phases in the right order.

Building your backyard
Phase One
planning

The first phase is planning the layout. Step back and really look at what you have. This will be a great time to brainstorm with a tablet of paper and pencil to sketch out different scenarios. By drawing different layouts on a piece of paper, you can compare the different possibilities and see what works the best for your space. You may find that certain layouts will make better sense than others. Talk your ideas over with family and friends and take in their ideas. You never know, you may not have thought of everything.

Building your backyard
PHASE TWO
gathering

The second phase is gathering what you will need to get the job done. This includes everything from a construction plan, the tools necessary, and the materials needed to build your project. If you are wanting to build a masonry structure, have the vendor deliver the blocks, mortar, and cement on a pallet to as close to the work site as possible.

The tools needed are sometimes specialized so you won’t have too many other opportunities to use them again. These will be trowels, masonry cutting blades, etc. Borrow what you can and don’t buy them if you don’t have to. If you must buy a tool, buy cheap, and even if you must buy two, it still may not be as expensive as one professional grade tool.

Building your backyard
PHASE THREE

The third phase is the best part, the building of the project. A solid foundation is paramount for many masonry structures due to their weight. A lack of stability under a masonry structure could result in shifting and cracking. The building phase is a great time to get help from family and friends. Sometimes a pizza and beverages go a long way.

The building phase will be the part everyone will see so definitely take your time and pay attention to the small stuff, the detail, the minutia. It’s the attention to detail that will make your project a stand-out backyard.

When you get to lighting and irrigation make sure you don’t have too much of the project finished. This is especially irritating if you have to rip out some of the progress to add electrical and water lines.

While building your backyard, pay attention to the phases and your project will turn out to be the talk of the town thus your neighbors and family will be in awe. Be careful because you will then be the go-to for the how to.

If you need any assistance on a masonry structure like a fireplace, kitchen, pizza oven, and want a DIY construction plan, visit www.backyardflare.com. Building your backyard does not have to be a chore or burden. We’ll help you along the way and give you the insight you’ll need to get it done and on a budget. Happy building.

Cinder Blocks Explained

Cinder block sizes vary and many different shapes are available for your outdoor projects. There are short ones, tall ones, solid ones and some are made with holes/voids. Not only are they different sizes, but some that are classified with the same dimensions can be slightly different allowing them to be used in a different manner.

You can build outdoor structures such as fireplaces, kitchen, and pizza ovens using primarily the blocks that are described in this article. Just for a bit of clarification, most people will call them cinder blocks but there is a slightly more technical term for them. They are sometimes referred to as concrete masonry units (CMU) by the folks that make them and sell them. When shopping for these blocks, you only need to call them cinder blocks though and know a little about how they are sized. The cinder blocks sold in the United States are sized in inches.

Cinder Blocks and Sizes Explained

8x8x16 Block

The most common cinder block is an 8x8x16 as seen in the adjacent picture. These measurements are the depth, height, and width respectively. Most construction projects, needing any structural integrity, will be built using this size block. These blocks have voids, designed to be filled with concrete, which provides great strength.

8x8x8 Block

These 8x8x8 cinder blocks are perfect cubes that are widely used in conjunction with the 8x8x16 cinder blocks. These blocks also have voids which allow them to be filled with concrete.

Some have notches manufactured into them for rebar, but the notch will not be used most of the time. When you are building using a running bond/staggered pattern, these will certainly be useful.

8x4x16 block

An 8x4x16 cinder block is half as tall as standard 8x8x16 cinder blocks, so they are very good to incorporate into your structure. These cinder blocks are used as a transition block when only a little bit of height is needed as they are only 4” tall. These blocks also have voids.

4x8x16 block

4" block used for your outdoor fireplace — 4x8x16

Occasionally, you will need a cinder block that is only 4” in depth. These cinder blocks are measured 4x8x16. They have much smaller voids in them which makes them harder to fill with concrete.

A lot of cinder block walls are constructed using these blocks.

8x2x16 cap block

Use these cinder blocks for finish work and solid surfaces. — 8x2x16 cap block

One of the last widely used cinder blocks is an 8x2x16 cap block. When you only need to add a couple inches to your structure or to close off a section, you will use these blocks. These cinder blocks are solid and are also used when a flat surface is needed for finish work.

If you are interested in building an outdoor fireplace or kitchen there are great ways of building them. Cinder blocks are just one way of constructing them, but it’s a fantastic way to build a structure with great integrity and strength. Visit www.backyardflare.com for great outdoor fireplace designs, ideas, and DIY construction plans.

Great Ways to Finish Your Outdoor Fireplace

There are some great ways to finish your outdoor fireplace. Basically, there are endless of ways to add the finishing touches which will make your outdoor fireplace a one of a kind. Even if you build the basic rough structure that another person constructed, yours will look different.

If you pay attention to detail, your fireplace and backyard landscape can look like something in a magazine. We will cover five of the big finishing touches and things you can do to give your fireplace the wow factor.

1. Low voltage lighting

Even when the fireplace is not being used, low voltage lighting is a great way to add a great night time visual aspect to it. The lighting is powered by a transformer specifically designed for these types of lights. By connecting the fireplace lights to landscape lighting in your yard, everything will be illuminated at the same time.

Lighting adds a great look to any fireplace

2. Natural stone seating surface

By using a natural stone material for the seating, you will have a very durable, and inexpensive surface. There are a couple widely used stone options, such as flagstone and bluestone. Both can be purchased at landscape supply retailers and you will have tons of colors and patterns to choose from. Cutting the stone is as simple as using a diamond blade for a smooth edge or a chisel and hammer for a rough rustic edge.

3. Stacked Stone Veneer

Stacked stone is a great way to finished the vertical surfaces of the fireplace, but it can be somewhat expensive as compared to other finish options. This type of material is purchased in arrangements that will fit together seamlessly. The stone is real and engineered during the cut process, meaning that it will be very easy to install. Cutting this stone will take a bit more time and patience as it is sometimes brittle.

Stacked stone added to the fireplace hearth.

4 . Faux Veneer

Faux veneer is a fabulous way to add a cheaper finish to the outside of your fireplace than natural stone. The great thing about faux veneer is that you can find virtually any texture, color, shape, and size imaginable. The faux stone is basically a manmade product that is painted and finished to look just like a real material. The faux stone is very easy to cut but it may take a bit of extra time fitting it together. There is no “one way” to put it together most of the time, so using your Tetris skills will come in handy. Faux veneer will usually require corner pieces that will give you a great finished look as the material wraps from one vertical surface to another.

faux veneer outdoor fireplace — DIY built fireplace with faux veneer.

5. Wrought iron accents

Wrought iron accents will add both a décor and some functionality to your fireplace. First, add an elevated fire grate in your firebox. This will both give you a great look, but it will aid in keeping your burning wood elevated for proper air flow. Fireplace tools will give you the capability of working and stoking your fire as you need to. Many tools sets will come with a holder as well keeping it nice and neat.

outdoor fireplace wrought iron — Adding wrought iron definitely adds character.

Well there you go, five considerations that if done right, will set your fireplace on a pedestal. You don’t have to do them all to achieve a great look, but they certainly won’t hurt.

If you want to build your own outdoor fireplace, check out www.backyardflare.com for some great ideas and inspiration. We are sure you will get a vision for how you can transform your backyard into a great destination.

Building a Dream Backyard

The latest fireplace profile comes to you from South Carolina. Builder and homeowner Nick had plans of building a dream backyard and he contacted Backyard Flare, LLC for help. Nick is a DIY enthusiast and he knew he could build his own outdoor fireplace. He chose the Douglas design and got his construction plan from Backyard Flare.

Starting Off With a Blank Slate

Nick had an existing stamped concrete patio in his backyard with a small flowering garden on one corner. The patio wasn’t designed or constructed with weight bearing in mind so Nick poured an additional slab for the fireplace. Nick built a wood frame to see the footprint of the structure as well.

Drainage was added to the slab so that water would not accumulate. This is a very smart move when building a non-linear structure. The drainage was built through the entire slab so any water drained behind the structure.

Nick’s DIY Construction

The cinder block work was started with the wing walls built to the same height as the main seating section. The normal Douglas design has the side extensions higher than the center seating section so this modification was Nick’s vision.

Ready for Veneer — Nick finished the rough build phase of construction.

The entire structure was built in rough form, then it was time for veneer and finish work. Nick covered the horizontal surfaces with a neutral flagstone. The edges were left rough for a great outdoor look. Nick chose a great looking faux stone with a relatively small pattern. The pieces were not all the same size so there was a bit of puzzle piecing the veneer together. This task slows down the construction but it makes for a great looking veneer pattern.

After the construction was completed, Nick added a couple colored deck chairs and a rustic piece of log for a small “beer holder”. The chimney was adorned with a great looking wreath and a log holder was added for spare firewood.

Nick used veneer on the backside of the fireplace for complete finished look.

Build Your Own Dream Space

If you would like to explore the possibility of building an outdoor structure such as a fireplace or outdoor kitchen visit us at www.backyardflare.com. We will help you with all your design needs so most of the guess work will be taken out of it for you. Thanks for reading and we hope to hear from you. Happy building!